Challenger Lifts CLM16, Installation, Operation And Maintenance Manual

Page: 30 / 57

Load Capacity of Hydraulic Dolly
If the dolly is not able to lift the unloaded column,
adjust the hydraulic pressure.
The adjusting device is located below the lifting gear
(see arrow).
CAUTION
Adjust the load capacity in a way that the lifted dolly supports the weight of the
unloaded column only.
If the load capacity is set too high, the dolly will not lower automatically once a vehicle is lifted.
This may result in equipment damage.
Remove screw plug (1) using a wrench. Using a screwdriver, turn the adjusting
screw (2):
to the left
→
to reduce the load capacity
to the right
→
to increase the load capacity.
Reinstall the screw plug.
CLM16 IOM.
DOC
5/8/09