CG Emotron VFX Series, Instruction Manual

Page: 38 / 268

34 Installation CG Drives & Automation, 01-5326-01r5
AC drive model 48-300 and 69-250 and up
Fig. 50 Connect motor cables and mains cables to the
terminals and earth/ground to the bus bar.
AC drive models 48-300 and 69-250 and up are supplied
with power clamps for mains and motors. For connection of
PE and earth there is a grounding bus bar.
For all type of wires to be connected the stripping length
should be 32 mm (1.26 in).
3.3.1 Connection of mains and
motor cables on IP20 modules
The Emotron IP 20 modules are delivered complete with
factory mounted cables for mains and motor. The length of
the cables are app. 1100 mm (43 in). The cables are marked
L1, L2, L3 for mains connection and U, V, W for motor
connection.
For detailed information about use of the IP20 modules,
please contact CG Drives & Automation.
Fig. 51 IP20 module sizes G and H, with qty 2 x 3 mains
cables and qty 2 x 3 motor cables.
Motor connection
U
V
W
Mains Connection
L1
L2
L3
Ground / earth
connection
bus bar
NOTE: The IP20 modules are connected to PE/
Ground via the mounting screws. Make sure that
these will have good contact to the grounded
mounting plate/ cabinet wall.
PEBB 1
(Master)
PEBB 2
Mains cables
Motor cables
U, V, W
L1, L2, L3
DC-, DC+, R
(optional)