Lease Time :
The IP addresses given out by the DHCP server will only be valid for
the duration specified by the lease time. Increasing the time ensure client operation
without interruptions, but could introduce potential conflicts. Lowering the lease time
will avoid potential address conflicts, but might cause more interruptions to the client
while it will acquire new IP addresses from the DHCP server. Default is
86400
seconds
Click
Save
button to save your changes. Click
Reboot
button to activate your
changes
5.4
Wireless General Setup
The administrator can change the data transmission, channel and output power settings for the
system. Please click on
Wireless -> General Setup
and follow the below setting.
MAC Address :
The MAC address of the Wireless interface is displayed here.
Band Mode :
Select an appropriate wireless band; bands available are
801.11 b/g/n
mixed
mode
Country :
a region, the DT-300N support region for US,ETSI and Japan
TX Power :
You can adjust the output power of the system to get the appropriate coverage
for your wireless network. Specify digit numbers between level
1
to level 9 (the unit is %) for
your environment. If you are not sure which setting to choose, then keep the default setting
level 9 (
100
%).
