Service :
By Default, It’s “
Disable
”
.
Check
Enable
radial button to enable Virtual Server.
Description :
Enter appropriate message for resource sharing via Virtual Server.
Private IP :
Enter corresponding IP address of internal resource to share.
Protocol Type :
Select appropriate sessions, TCP or UDP, from shared host via multiple
private ports.
Private Port :
A port or a range of ports may be specified as
start:end
; i.e. port 20:80
Public Port :
A port or a range of ports may be specified as
start:end
; i.e. port 20:80
Click “
Add
” button to add Virtual Server rule to List. Total of maximum
20
rules are allowed in this
List. All rules can be edited or removed from the List.
Click
Reboot
button to activate your changes.
Schedule :
Can choose to use rule by “Time Policy”
While creating multiple Virtual Server rules, the prior rules have higher priority. The Virtual server
rules have precedence over the DMZ one while both rules exist. Example 1 and 2 demonstrate
proper usage of DMZ and Virtual Server rules.
Example 1
:
All connections should be redirected to
192.168.2.12
while DMZ is enabled. Since Virtual Server
rules have precedence over the DMZ rule all connections to TCP port 22 will be directed to TCP
The Private Port and Public Port can be different. However, total number of ports need
to be the same.
Example : Public Port is 11 to 20 and the Private Port can be a 10 ports range.
