6.6 Wireless General Setup
The administrator can change the data transmission, channel and output power settings for the
system. Please click on
Wireless -> General Setup
and follow the below setting.
MAC Address :
The MAC address of the Wireless interface is displayed here.
Band Mode :
Select an appropriate wireless band; bands available are
801.11 b/g/n
mixed
mode
Country :
a region, the DT-300N support region for US,ETSI and Japan
TX Power : You can adjust the output power of the system to get the appropriate coverage for
your wireless network. Specify digit numbers between level
1
to level 9 (the unit is %) for your
environment. If you are not sure which setting to choose, then keep the default setting level 9
(
100
%).
HT Physical Mode
Tx
/
Rx Stream :
By default, it's
2
Channel Bandwidth :
The "
20/40
” MHz option is usually best. The other option is
available for special circumstances.
MCS :
This parameter represents transmission rate. By default (Auto) the fastest possible
transmission rate will be selected. You have the option of selecting the speed if
necessary.
