5.
Client Repeater AP Mode Configuration
When Client Repeater AP Mode is chosen, the system can be configured as an Client Bridge
+ Repeater APMode. This section provides detailed explanation for users to configure in the Client
Repeater AP Mode with help of illustrations. In the Client Repeater AP Mode,
functions listed in the table below are also available from the Web-based GUI interface.
5.1
Chose Your Operating Mode(Client Repeater AP)
The system administrator can set the desired mode via this page, and then configure the system
according to their deployment needs, Please click on System -> Operating Mode and follow the
below setting.
5.2 External Network Connection ( Network Requirement )
It can be used as an Client Bridge or Repeater AP to receive wireless signal over last mile
applications, helping WISPs deliver wireless broadband Internet service to new residential and
business customers. In this mode,
DT-300N
is enabled with DHCP Server functions. The wired
clients of
DT-300N
are in the same subnet from Main Base Station and it accepts wireless
connections from client devices.
