Upgrade firmware
The upgrade firmware will support via local PC and TFTP Server and HTTP URL to upgrade
system
9.3 Network Utility
The administrator can diagnose network connectivity via the PING or TRACEROUTE utility.
Please click on
Utilities
->
Network Utility
and follow the below setting.
Ping
: This utility will help ping other devices on the network to verify connectivity. Ping utility,
using ICMP packets, detects connectivity and latency between two network nodes. As result
of that, packet loss and latency time are available in the
Result
field while running the PING
test.
IP/Domain
: Enter desired domain name, i.e. www.google.com, or IP address of the
destination, and click ping button to proceed. The ping result will be shown in the Result
field.
Count
: By default, it’s 5 and the range is from 1 to 50. It indicates number of
connectivity test.
Traceroute
: Allows tracing the hops from the DT-300N device to a selected outgoing IP
address. It should be used for the finding the route taken by ICMP packets across the
