Centroid 13126, Install Manual

Page: 3 / 86

SERVO DRIVE WARRANTY DOES NOT COVER DAMAGE BY FAULTY MOTORS OR WIRING.
The information provided by CENTROID relating to wiring, installation, and operation of CNC components is intended only
as a guide, and in all cases a qualified technician and all applicable local codes and laws must be consulted. CENTROID makes
no claims about the completeness or accuracy of the information provided, as it may apply to an infinite number of field conditions.
As CNC control products from CENTROID can be installed on a wide variety of machine tools NOT sold or support by
CENTROID, you MUST consult and follow all safety instructions provided by your machine tool manufacture regarding
the safe operation of your machine and unique application.
Servo Motor Handling
When working with servo motors:
· NEVER pick up or carry the motor by the cables or the shaft. (Always carry by the frame.) Use a crane or lift to move the
motor when necessary.
· NEVER drop or subject the motor to impact. The servo motor is a precision device.
· NEVER set heavy or sharp objects on the motor or cables. Do not step or sit on the motor or cables.
· NEVER use a metal hammer on any part of the motor. If it is absolutely necessary to use a hammer, use a plastic
hammer.
Keep the motor properly secured and away from the edge of the work area when servicing the motor, as a dropped motor could
cause personal injury or destroy the motor.
Page 3 of 86