39
SR-3 Support Bracket
An SR-3 support bracket, available from CEI, will hold the
Color Six more securely to the SR-3. We strongly recom-
mend the use of this device. To install the support bracket:
1. Remove the dovetail accessory mount from the right side of
the SR-3.
2. Install the restrainer mounting plate under the dovetail using
the longer screws provided by CEI. Make sure the mounting
plate is installed with the protruding foot located at the upper
left corner of the dovetail.
3. Install the Color Six following the instructions above.
Securely tighten the C-mount and Arri friction lock (the big
black ring), but do not overtighten.
Since the Color Six has its own centering system, centering
with the Arri friction lock need only be approximate. There
is no need to force the Arri friction lock into a precisely
centered position.
4. The Color Six should rest firmly against the foot protruding
from the mounting plate.
5. Screw the padded retaining bolt into the foot until the outer
knob pad contacts the Color Six . Do not overtighten this
bolt. Only slight pressure with the Color Six is adequate:
Any loosening or movement of the Arri system will be
prevented by the padded foot on the mounting plate.