24
Store
When the STORE function is underlined, a single click of
the multipurpose control will capture the frame currently
seen by the camera in the location selected. If the camera
”A” video is not visible in the monitors (as would be the
case if MEM was selected under the MIX function), the
frame will still be captured. The counter advances to the next
location each time an image is captured: If an image is
already stored at the indicated location, it will be overwritten
by the next captured frame.
All stored images are erased when the camera is powered
down.
Display Vertical Position Menu
The next menu has only one function, to allow the displayed
menus and messages to be shifted closer to the top or bottom
of the monitor display. The adjustment is made using the
multipurpose control in the usual manner.
Time Code Menu
While not exactly a menu (since no selections are possible),
the TIME CODE displayed in this view is that being sup-
plied to the Color Six from the film camera through the 6-pin
AUX connector.
User Bits Menu
Again, no adjustment is possible from this menu, but it may
be used to view the User Bits that often accompany the Time
Code.