28
• The XI is a still later generation with further improvement in
field flatness, and the addition of an anchor mechanism to
assist in securing the lens to the video camera.
Directions for mounting the XI with lens clamp are as
follows:
1. Start with the 3/32-inch hex clamping screw loosened such
that the clamp rotates freely around the lens.
2. Begin screwing the lens into the camera, then rotate the
clamp to align the pin to the threaded hole in the face of the
video camera.
3. Maintain this alignment while threading the lens the rest of
the way into the video camera.
4. Tighten the 3/32-inch hex head screw to lock the lens and
prevent further rotation.
To Use the Appendix
Turn to the section that contains installation instructions for
your film camera. Instructions for attachment to the follow-
ing film cameras are included in this manual:
• Aaton 35
• Arriflex 35-3
• Arriflex 35BL
• Arriflex 435
• Arriflex 535A
• Arriflex 535B
• Arriflex SR-2