SOHOSpeed ADSL2/2+ Ethernet/Wireless Gateway User’s Manual
96
Field Description
Field Definition/Description
Log Level
There are eight log levels listed below in order of severity:
z
Panic
z
Alert:
z
Critical
z
Error
z
Warning
z
Notice
z
Info
z
Debug
The default log level is Panic.
Refer to previous table for more information on each log level.
Add an IP
Address
You should enter the IP address of the remote host to which you want the log
information be forwarded. You can add more than more IP address, and any IP
address you add here appears in the drop-down list of the next field: Select a
logging destination.
Select a
Logging
Destination
You can select a destination IP address from the drop-down list. This defines
where the log information will be sent. You can customize the destination list
using the Add and Delete buttons.
3.8.4 User
Management
This page allows you to change your login name and password.
Field Description
Field
Definition/Description
User Name
Admin is your default user name. You can enter your new user name here.
Password
Admin is your default password. You can enter your new password here.
Note:
If you forget your password, you can press and hold the reset to factory
default button for 10 seconds (or more). The SOHOSpeed will reset to its
factory default configuration and all custom configuration will be lost.
Confirmed
Password
Enter your new password here again to confirm.
Idle Timeout
The default is 30 minutes. You will need to log back onto the SOHOSpeed after
your session has been inactive for 30 minutes. You can change the timeout
here.
