SOHOSpeed ADSL2/2+ Ethernet/Wireless Gateway User’s Manual
29
2.
Select
WLAN
in the Interface box and click
Add
next to LAN group 2.
WLAN
moves to
LAN
group 2 as shown in figure below. The
Configure
link for LAN
group 2 has also been generated, allowing additional configurations for the defined LAN
group.
Two LAN segments have been configured as shown in figure below with two sets of IP
addresses. The Ethernet and USB interfaces belong to LAN group 1 with an IP of 192.168.1.x.
The WLAN interface belongs to LAN group 2 with an IP of 192.168.2.x.
3.
Click
Apply
to temporarily activate the changes.
Note:
The changes take effect when you click
Apply
; however, if the SOHOSpeed
configuration is not saved, these changes will be lost upon SOHOSpeed reboot.
4.
To make the change permanent, click
Tools
at the top of the page and select
System
Commands
.
5.
At the
System Commands
page, click
Save All
.
