SOHOSpeed ADSL2/2+ Ethernet/Wireless Gateway User’s Manual
82
Up to 255 rules can be configured for each interface.
Note:
Any ToS that have not been mapped to a CoS is treated as CoS6, the lowest
priority.
6.
Repeat step 1-5 to create rules to another WAN/LAN interface.
Note:
Any WAN/LAN interface that is not configured has the default Untrusted mode.
7.
To make the change permanent, click
Tools
at the top of the page and select
System
Commands
.
8.
At the
System Commands
page, click
Save All
.
z
Ingress Static Configuration
The Ingress - Static page enables you to configure a static CoS for all packets received on a
WAN or LAN interface.
Follow the procedure below to configure Ingress static QoS settings:
1.
At the Interface drop-down box, select USB.
You are configuring QoS on this interface only. Any WAN/LAN interface that is not
configured has the default Untrusted mode.
2.
Select CoS1 in Class of Service.
All incoming traffic from the USB interface receives CoS1, the highest priority.
3.
Click
Apply
to temporarily activate the settings.
Note:
The changes take effect when you click
Apply
; however, if the SOHOSpeed
configuration is not saved, these changes will be lost upon SOHOSpeed reboot.
4.
To make the change permanent, click
Tools
at the top of the page and select
System
Commands
.
5.
At the
System Commands
page, click
Save All
.
