SOHOSpeed ADSL2/2+ Ethernet/Wireless Gateway User’s Manual
8
2.2 LED
Description
Power LED:
The LED stays lighted to indicate the system is power on properly.
WAN LED:
This LED is lighted when the WAN connection is established and flashes when
the WAN port is sending/receiving data.
WLAN LED:
This LED is lighted when a wireless link is established and flashes when the
data is sending/receiving via wireless.
PPP LED:
This LED is lighted when a PPP link is established and flashes when the data is
sending/receiving via PPP. (Ethernet models)
LAN LED:
The LED is lighted when a connection is established to LAN port and flashes when
LAN port is sending/receiving data. (The number of LAN ports depends on your model.)
USB LED:
The LED is lighted when a connection is established to USB port and flashes
when USB port is sending/receiving data.
2.3 Installing
your
SOHOSpeed
1.
Locate an optimum location for the SOHOSpeed.
2.
For connections to the Ethernet and DSL interfaces, refer to the Quick Installation Guide.
3.
Connect the AC Power Adapter. Depending upon the type of network, you may want to
put the power supply on an uninterruptible supply. Only use the power adapter supplied
with the SOHOSpeed. A different adapter may damage the product.
Now that the hardware installation is complete, continue on to set up your SOHOSpeed.
