SOHOSpeed ADSL2/2+ Ethernet/Wireless Gateway User’s Manual
95
Field Description
Field Definition/Description
Log Level
There are eight log levels listed below in order of severity:
z
Panic: System panic or other condition that causes the SOHOSpeed to
stop functioning.
z
Alert: Conditions that require immediate correction, such as a corrupted
system database.
z
Critical: Critical conditions, such as hard drive errors.
z
Error: Error conditions that generally have less serious consequences than
errors in the emergency, alert, and critical levels.
z
Warning: Conditions that warrant monitoring.
z
Notice: Conditions that are not errors but might warrant special handling.
z
Info: Events or non-error conditions of interest.
z
Debug: Software debugging message. Specify the level only when so
directed by a technical support representative.
The default log level is Notice.
Note:
When you select a log level, all log information within this severity level
and levels above (meaning, more severe levels) will be sent to the remote host.
Add an IP
Address
You should enter the IP address of the remote host to which you want the log
information be forwarded. You can add more than more IP address, and any IP
address you add here appears in the drop-down list of the next field: Select a
logging destination.
Select a
Logging
Destination
You can select a destination IP address from the drop-down list. This defines
where the log information will be sent. You can customize the destination list
using the Add and Delete buttons.
3.8.3 Remote Log - Voice
Remote Log - Voice Settings page can be accessed by clicking the Remote Log - Voice link
at the left of the Tools page.
