SOHOSpeed ADSL2/2+ Ethernet/Wireless Gateway User’s Manual
87
Field Description
Field Definition/Description
Interface
Select the WAN interface to configure the QoS for outgoing packets. LAN
interface can not be selected as VLAN is currently supported on the WAN
side only.
Unclassified
Packet
Some locally generated packets might not have been classified and thus do
not have a CoS value, such as PPP control packet and ARP packet. You
can define the CoS for all unclassified outgoing packets on layer 2 using this
field, which will then pick up the user priority bits based on the mapping rules
you create. The selections are (in the order of descending priority): CoS1,
CoS2, CoS3, CoS4, CoS5, and CoS6. The default value is CoS1
(recommended)
User Priority
The selections are 0, 1, 2, 3, 4, 5, 6, 7.
Class of
Service
The selections are (in the order of descending priority): CoS1, CoS2, CoS3,
CoS4, CoS5, and CoS6.
Egress Layer 3 Configuration
The Egress Layer 3 page enables you to map CoS to ToS so that the priority marking of
outgoing packets can be carried over to the IP network.
Egress - Layer 3 Page Descriptions
Field Definition/Description
Interface
Select the WAN/LAN interface here to configure the QoS for outgoing
traffic to the IP network.
Default Non-IP
Locally generated packets (such as ARP packets) do not have a CoS
marking. You can define the CoS for all unclassified outgoing packets on
layer 3 using this field. The selections are (in the order of descending
priority): CoS1, CoS2, CoS3, CoS4, CoS5, and CoS6. The default value is
CoS1 (recommended).
Translated ToS
The Type of Service field takes values from 1 to 255. The selections are 0,
1, 2, 3, 4, 5, 6, 7.
Class of Service
The selections are (in the order of descending priority): CoS1, CoS2,
CoS3, CoS4, CoS5, and CoS6.
