manualshive.com logo in svg

CastleNet Technology Inc. ASW802, User Manual

Share
Download
CastleNet Technology Inc. ASW802 User Manual Download Page 69

SOHOSpeed ADSL2/2+ Ethernet/Wireless Gateway User’s Manual 

68

3.7.13 IGMP Proxy 

Multicasting is a form of limited broadcast. UDP is used to send datagrams to all hosts that 
belong to what is called a Host Group. A host group is a set of one or more hosts identified by 
a single IP destination address. The following statements apply to host groups: 

z

Anyone can join or leave a host group at will. 

z

There are no restrictions on a host’s location. 

z

There are no restrictions on the number of members that may belong to a host group. 

z

A host may belong to multiple host groups. 

z

Non-group members may send UDP datagrams to the host group. 

Multicasting is useful when the same data needs to be sent to more than one device. For 
instance, if one device is responsible for acquiring data that many other devices need, then 
multicasting is a natural fit. Note that using multicasting as opposed to sending the same data 
to individual devices uses less network bandwidth. The multicast feature also enables you to 
receive multicast video streams from multicast servers. 
IP hosts use Internet group management protocol (IGMP) to report their multicast group 
memberships to neighboring routers. Similarly, multicast routers use IGMP to discover which 
of their hosts belong to multicast groups. 
Your SOHOSpeed supports IGMP proxy that handles IGMP messages. When enabled, your 
SOHOSpeed acts as a proxy for a LAN host making requests to join and leave multicast 
groups, or a multicast router sending multicast packets to multicast groups on the WAN side. 

The IGMP Proxy page allows you to enable multicast on available WAN and LAN connections. 
You can configure the WAN or LAN interface as one of the following: 

1.

Upstream: The interface that IGMP requests from hosts are sent to the multicast router. 

2.

Downstream: The interface data from the multicast router are sent to hosts in the 
multicast group database. 

3.

Ignore: No IGMP request nor data multicast are forwarded. 

You can perform one of the two options: 

1.

Configure one or more WAN interface as the upstream interface. 

2.

Configure one or more LAN interface as the upstream interface. 

Each option is discussed in more details as follows. 

Summary of Contents for ASW802












































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands