SOHOSpeed ADSL2/2+ Ethernet/Wireless Gateway User’s Manual
43
3.6.5 Wireless
Management
The wireless management function gives another level of security to your AP. It allows you to
create an allowed access list or a banned access list (not both) and view a list of stations
associated with your access point.
Access List
By clicking Management from the left-hand navigation list, you are taken to the default Access
List page.
You can create an Allowed or Banned access list from the Access List page using Procedure
4-4.
1.
Check
Enable Access List
.
2.
Select
Allow
to create an allowed access list or
Ban
to create a banned list.
Note:
You cannot create both.
3.
Enter a MAC address of an allowed or banned station, then click
Add
.
This station appears in your allowed or banned access list.
4.
Repeat this step for each station you want to add to your access list.
5.
Click
Apply
to complete the settings.
Note:
The changes take effect when you click
Apply
; however, if the SOHOSpeed
configuration is not saved, these changes will be lost upon SOHOSpeed reboot.
6.
To make the change permanent, click
Tools
at the top of the page and select
System
Commands
.
7.
At the
System Commands
page, click
Save All
.
