SOHOSpeed ADSL2/2+ Ethernet/Wireless Gateway User’s Manual
73
1.
From the Choose a connection drop-down menu, select your LAN connection LAN
Group 1.
2.
Enter or leave the default entry for the following parameters:
z
New Destination IP: 10.0.0.0 (the network IP address of the subnet)
z
Mask: 255.255.255.0 (the subnet mask)
z
Gateway: 192.168.1.5 (the LAN-side IP address of the second router, through
which the stations in the subnet access the network)
z
Metric: 0
You are telling the SOHOSpeed that a new subnet with an IP of 10.0.0.0 and a netmask
of 255.255.255.0 has been added and can access the SOHOSpeed via station
192.168.1.5.
The metric is 0 since the subnet is one level down on the LAN.
3.
Click
Apply
to temporarily activate the settings.
You have added the subnet to the routing table. The four stations in the subnet can
receive packets from the WAN.
Note:
You can add up to 16 entries. You can also delete any entry using the Delete checkbox.
4.
Click
Apply
again when you finish making all the changes.
Note:
The changes take effect when you click
Apply
; however, if the SOHOSpeed
configuration is not saved, these changes will be lost upon SOHOSpeed reboot.
