Casio FX-CG10, User Manual

Page: 9 / 608

viii
• Pressing
a-
causes the dialog box shown below to appear. The dialog box shows the
elapsed time in the Examination Mode.
You can restart the elapsed time count by performing one of the operations below.
- Press the RESTART button.
- Remove the calculator’s batteries.
- Delete Main Memory data.
- Re-enter the Examination Mode while already in the Examination Mode.
• The table below shows how certain operations affect the Examination Mode.
If you do this:
The calculator stays in
Examination Mode. Data input in Examination
Mode is retained.
Turn power off and then back on
again
Yes Yes
Press the RESTART button Yes No
Remove the calculator’s batteries Yes No
Delete Main Memory data Yes No
u Exiting the Examination Mode
There are three ways to exit the Examination Mode.
(1) Exiting the Examination Mode by Connecting to a Computer
1. Use the USB cable to connect the calculator that is in the Examination Mode to a
computer.
2. When the “Select Connection Mode” dialog box appears on the calculator, press the
calculator’s
1
key.
3. On the computer, open the calculator drive.
4. On the computer, copy or delete any file that is on the calculator drive.
5. Terminate the connection between the calculator and computer.
• The dialog box shown below will appear when you exit the Examination Mode.