Casio FX-CG10 User Manual Download Page 457

Page: 457 / 608

13-16

3. Connecting the Calculator to a Projector

You can connect the calculator to a CASIO projector and project calculator screen contents
onto a screen.

Connectable Projectors

For information about connectable projectors, visit the site below.

http://edu.casio.com/support/projector/

To project calculator screen contents from a projector

1. Use the USB cable that comes with the calculator to connect to the projector.

• Connecting the USB cable to the calculator will cause the “Select Connection Mode” dialog

box to appear.

2. Press

(Projector).

Precautions when Connecting

• The

icon may remain projected on the screen after you connect the calculator to a

projector. If this happens, performing some operation on the calculator will restore normal
display.

• If the calculator stops operating normally, disconnect the USB cable and then reconnect it. If

this does not correct the problem, disconnect the USB cable, turn the projector off and then
back on, and then reconnect the USB cable.

• Connecting the calculator to a projector with the USB cable immediately after starting up

the projector may cause the projected image to appear in grayscale and not in color. If this
happens, disconnect and then reconnect the USB cable.

Summary of Contents for FX-CG10

































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for FX-CG10

Reviews:

Brands by name

Popular brands

Casio FX-CG10, User Manual

Search results

Summary of Contents for FX-CG10

Reviews:

Brands by name

Popular brands