14-8
k
Displaying a Geometry Mode Screen Background Image
In the
Geometry
mode, you can open an image file (g3p) and use it as a background image
for a
Geometry
mode drawing.
• If you open a g3p file, draw something, and then save the result to a file, the g3p file will be
saved along with the
Geometry
mode data.
• After opening a background image, you adjust its lightness on the display. See “Adjusting the
Lightness of the Background Image” (page 14-37).
• Once you add a background image and save it, you will not be able to change the
background image of the file or remove it.
u
To open a g3p file in the Geometry mode
1. Perform the following operation:
1
(File) – 2:Open.
2. Press
6
(STRGMEM).
• This displays the storage memory file list screen.
3. Use
c
and
f
to move the highlighting to the background image file you want to use and
then press
w
.
• If a drawing is currently on the screen, the “Clear current image?” confirmation dialog box
will appear.
4. To clear the current drawing, press
1
(Yes).
• If the file does not contain any
Geometry
mode data, a dialog box will appear at this
point asking if you want to use the Geometry V-Window initial default value. To open the
file using the Geometry V-Window initial default value, press
1
. To cancel the open file
operation, press
6
.
• If the file already contains
Geometry
mode data, the file will open immediately.
Summary of Contents for FX-CG10
Page 555: ...E CON3 Application English...
