2-12
3. Specifying the Angle Unit and Display Format
Before performing a calculation, you should use the Setup screen to specify the angle unit and
display format.
k
Setting the Angle Unit
[SET UP]
-
[Angle]
1. On the Setup screen, highlight “Angle”.
2. Press the function key for the angle unit you want to specify, then press
J
.
• {
Deg
}
/
{
Rad
}
/
{
Gra
} ... {degrees}/{radians}/{grads}
• The relationship between degrees, grads, and radians is shown below.
360° = 2
π
radians = 400 grads
90° =
π
/2 radians = 100 grads
k
Setting the Display Format
[SET UP]
-
[Display]
1. On the Setup screen, highlight “Display”.
2. Press the function key for the item you want to set, then press
J
.
• {
Fix
}
/
{
Sci
}
/
{
Norm
}
/
{
Eng
} ... {fixed number of decimal places specification}/
{number of significant digits specification}/{normal display}/{Engineering mode}
u
To specify the number of decimal places ( Fix)
Example
To specify two decimal places
1
(Fix)
c
w
Press the number key that corresponds to the number of decimal places you want to specify
(
n
= 0 to 9).
• Displayed values are rounded off to the number of decimal places you specify.
Summary of Contents for FX-CG10
Page 555: ...E CON3 Application English...
