manualshive.com logo in svg

Casio FX-CG10, User Manual

Share
Download
Casio FX-CG10 User Manual Download Page 419

10-22

k

 Saving a File

  Use the procedures in this section to save a file after inputting or editing it on the workspace 
screen.

 

 

  An eActivity file for the fx-CG10/fx-CG20/fx-CG20 AU may have a file name extension of 
“g3e”. Performing either of the following operations on the fx-CG10/fx-CG20/fx-CG20 AU to 
save an eActivity file always will cause the extension “g3e” to be appended to the file name.

  • Saving a newly created file

  • Saving an existing file using the “save as” operation ( 

1

(FILE) 

2

(SAVE

 • 

AS))

 

 

  If you save an eActivity file using the fx-CG10/fx-CG20/fx-CG20 AU to save a file with a 
file name extension “g2e” (a file transferred from an older version calculator), the file name 
extension will be determined according to the following rules.

  • The “g3e” extension is used for an eActivity file that includes data for new features added by 

the fx-CG10/fx-CG20/fx-CG20 AU.

    Here, the expression “data for new features added by the fx-CG10/fx-CG20/fx-CG20 AU” 

means, for example, colored text data, memo data appended to a line, picture line data, etc.

  • The “g2e” extension is used for eActivity files other than those described above.

u

 To replace the existing file with the new version

  Press  

1

(FILE) 

1

(SAVE) to save the currently open file.

u

 To save a file under a new name

  1. On the eActivity workspace screen, press  

1

(FILE) 

2

(SAVE

 • 

AS).

  • This will display a file name input screen.

  2. Input up to 8 characters for the file name and then press  

w

.

  • If a file already exists with the same file name you enter in step 2, a message will appear 

asking if you want to replace the existing file with the new one. Press  

1

(Yes) to replace 

the existing file, or  

6

(No) to cancel the save operation and return to the file name input 

dialog box in step 2.

 

 

  Important!

  • An eActivity file with the g3e file name extension cannot be opened by any CASIO calculator 

model older than the fx-CG10/fx-CG20/fx-CG20 AU.   

• Using the fx-CG10, fx-CG20 or fx-CG20 AU to open an eActivity file with a file name 

extension of g1e or g2e, which was created on an older model CASIO calculator (fx-9860G, 
fx-9860G

II

, fx-9860G AU, fx-9860G AU PLUS, GRAPH 85/85 SD, GRAPH 95/75), will cause 

any G-MEM (Graph memory) or DYNA MEM (Dynamic Graph memory) instances in the 
eActivity strips to be deleted.

Summary of Contents for FX-CG10

































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands