![Casio FX-CG10 User Manual Download Page 15](http://html1.mh-extra.com/html/casio/fx-cg10/fx-cg10_user-manual_2568313015.webp)
1-5
k
About the Function Menu
Use the function keys (
1
to
6
) to access the menus and commands in the menu bar
along the bottom of the display screen. You can tell whether a menu bar item is a menu or a
command by its appearance.
k
Status Bar
The status bar is an area that displays messages and the current status of the calculator. It is
always displayed at the top of the screen.
• Icons are used to indicate the information described below.
This icon:
Indicates this:
The current battery level. The icons indicated (from left to right): Level 3,
Level 2, Level 1, Dead. See “Low Battery Message” (page 1-38) for more
information.
Important!
If the Level 1 icon ( ) appears, immediately replace the batteries. For
details about battery replacement, see the separate “Hardware User’s
Guide”.
Calculation in progress.
!
key was pressed and the calculator is standing by for the next key
operation.
a
key was pressed and the calculator is standing by for the next key
operation. The
icon indicates the lower-case input mode (
eActivity
and
Program
modes only).
Alpha Lock (page 1-2) is in effect.
!
i
(CLIP) was pressed and the calculator is standing by for range
specification (page 1-11).
Setup “Input/Output” setting.
Setup “Angle” setting.
Setup “Display” setting.
Setup “Frac Result” setting.
Setup “Complex Mode” setting.
• For details about the Setup screen, see “Using the Setup Screen” (page 1-32).
• For information about other icons and messages that are specific to each application, see
the chapters that cover each application.
Summary of Contents for FX-CG10
Page 555: ...E CON3 Application English...