Case IH RBX443, Repair Manual

Page: 52 / 196

SECTION 31 - IMPLEMENT DRIVELINE - CHAPTER 1
31-10
13. Install the rigid shield, 1. Align the holes with the
reference pins, 2, on the bearing ring. Insert and
tighten the Philips head screws, 3.
3
3
20013771
3
1
2
2
23
Installation
1. The PTO sections will only slide together in
one position. The male half has three points.
One of the three points, 1, is flat on top. The fe-
male half has three lobes to mate with the points.
One of the lobes is flattened 1/4
″
back from the
end. Remove the grease to see the stake mark,
2. To assemble the PTO sections align the flat
point with the flat lobe, the sections will slide to-
gether easily. The lobes allow movement be-
tween the PTO halves for shear bolt installation.
1
20013747
24
2
20013748
25