Case IH RBX443, Repair Manual

Page: 50 / 196

SECTION 31 - IMPLEMENT DRIVELINE - CHAPTER 1
31-8
7. Place the metal ring, 1, on the base cone, 2.
Place the CV shield, 3, with the hole, 4, as shown
in the picture with reference to the grease fitting,
5, on the cone. Install four Philips head screws,
6.
3
6
20013765
6
4
1
5 2
17
8. Grease the grooves on the CV body, 1, (with cen-
ter yokes) and on the inner yoke, 2. Install the
small bearing ring, 3. Install the large bearing
ring, 4, on the CV body with the reference pins,
5, toward the outer yoke, 6.
3
20013766
6
4
1
5
2
18
9. Slide the CV shield assembly, 1, on the CV body,
2. Align the grease fitting, 3, with the slit, 4, in the
bearing ring.
3
20013767
1
4
2
19