Casanoov TANKER C600, Instruction Manual

Page: 19 / 154

EN
19
FUNCTION DIP SWITCH MODE
Limit mode
setting
Dip 1/OFF NC mode(Factory setting)
Dip 1/ON No Mode
Limit switch direction
setting (J1)
Normal : Short circuit cap simultaneously No1 and No2 of J1 (Factory setting)
If motor system install at left of gate . Please adjust the J1 ,short the cap simultaneously No2 and No3
Infrared
mode set-
ting
Dip 2/OFF NC mode(Factory setting)
Dip 2/ON No Mode
CAUTION If the gate meet obstacles during closing, It will auto stop and auto open. After The gate complete
open to its place, it will auto close again if the obstacle disappear within 2s, if not , it will not auto
close until to the obstacle disappear
Auto close
time
setting
Dip 3&4 all
in OFF
Auto close function disabled (Factory setting)
Dip 3/ON &
4/OFF
10 S
Dip 3&4 all
in ON
30 S
Dip 3/OFF
& 4/ON
60 S
CAUTION Auto close function activated after gate complete open to its place and stop by limit switch
Auto close
time setting
when
pedestrian
mode
activated
Dip 5&6 all
in OFF
Auto close function disabled(Factory setting)
Dip 5/ON &
6/OFF
5S
Dip 5&6 all
in ON
10S
Dip 5/OFF
& 6/ON
30S
CAUTION 1.When the motor is running, the motor will stop immediately if triggers pedestrian mode
2.After triggering the pedestrian mode to open the gate for 6s, no mater it enter the countdown to close
the gate or stop status, If trigger again, the gate will close the gate immediately.
Condomi-
nium mode
setting
Dip 7 OFF Condominium mode disabled(factory setting)
Dip 7 ON Condominium mode activated
CAUTION When the gate is opening, trigger remote control and the start interface are invalid until the door is
opened.When the gate is closing, trigger remote control and the start interface , the gate will stop
to close and auto open until the opening limit is reached (the remote control and the start interface
are invalid when the gate is opening).
Remote
buttons
mode
Dip 8 OFF Single button control circularly,First button control gate open,stop, close, second
button use for pedestrian mode(factory setting)
Dip 8 ON
CAUTION
Please choose the remote control mode firstly before remote control code clearning to control
board