CAS NT-580A, Manual, Page: 51 / 87

52
▣ Display G/N weight by turns on the VFD screen
▣ Front key used, not used setting.
(The program is converted to input Mode by pressing the key for more than 3 sec.)
▣ “*” key is used in various ways.
▣ Set Point value for the batching operation.
(The program is converted to input Mode by pressing the key for more than
2sec.)
▣ It is used as the set function in the set Mode 17.
0. Do not use.
1. Print Key
2. Hold Key
▣ The ENTER key is used in various ways.
▣ Set Point code for the batching operation.
(The program is converted to input Mode by pressing key for more than
2sec.)
▣ It is used as the set function in the set Mode 18.
0. Do not use
1. Total Print key
2. Start key in the batching system
3. Stop key in the batching system
GROSS
NET
*
ENTER