CAS NT-580A, Manual, Page: 21 / 87

22
CAL 3
CAL 3-1
Function : Setting Multi Calibration Range
Setting value range : 1 ~ 5
USED KEY VFD SCREEN DESCRIPTION
STEP- 1
Setting 1 step multi calibration
(perform CAL3-3, CAL 3-4 once)
STEP- 3
Setting 3 step multi calibration
(perform CAL3-3, CAL 3-4 three times)
▲ , ▼ : increase or decrease of
no.
▶ , ◀ : Shift of digit
”* " : Cancel and
move to CAL-1
Enter : Store and move
into next menu
STEP- 5
Setting 5step multi calibration
(perform CAL3-3, CAL 3-4 five times)
CAL 3-2
Function : Zero Calibration
USED KEY VFD SCREEN DESCRIPTION
UnLoAd
Empty load receptor and press “ENTER” key.
1234
Present weighing value is displayed.
Check stability, press “ENTER” key.
”* " : Cancel and
move to CAL-1
Enter : Store and move
into next menu
- - -
In the setting zero calibration..
Ref 1. After setting zero calibration without errors, it is going to automatically move to CAL 3-3 without
pressing any key
Ref 2. If zero is too low, error massage “Err 27” will be displayed.
Ref 3. If zero is too high, error massage “Err 26” will be displayed.