CAS NT-580A, Manual, Page: 25 / 87

26
5. Set Mode
5-1. How to enter Set Mode
If you open the front cover of indicator and turn on the DIP S/W1, the Calibration Mode is
started.
At this time,
SET
message is displayed on VFD and
F 01
runs automatically.
If you turn on all of the DIP switches(1,1) after the Calibration, you can return to the Weighing
mode then.
1. F 01 : Call the function which you want to convert.
2. Input function no. to convert with arrow keys and press the ENTER key.
3. F01 1 : It means call the function which you would convert.
4. Input function no. to convert and press the ENTER key.
5-2. Available Keys in Calibration Mode
▲ , ▼ Key : Change the set value
▲ Key : increase the set value
▼ Key : decrease the set value
, Key : Change the digit of
▶ ◀
the set value
Key : moves one digi
▶
t to right
Key : moves one digit to left
◀
”* ” Key : Cancel of input value
ENTER Key : The program is moved into the next menu