Installing the Wireless Adapter and sensors
Wireless Sensors
CARRIER CORPORATION ©2018
Installation Guide
All rights reserved
33
4
Place the top of the sensor on the top of the mounting plate, and then swing downward until the sensor
snaps onto the mounting plate.
5
Tighten the setscrew.
To attach a remote thermistor to a Standard sensor
The Standard sensor with remote thermistor capability lets you mount the sensor in one location and retrieve the
temperature from another location.
Connect the remote thermistor's wires to the connector shown below.
To preserve battery life
Maintain at least 700 lux in the space where the sensor is installed, and set the sensor's
Heartbeat interval
and
COV threshold
to the default numbers or higher. Low lux and frequent signals can significantly impact battery life.
Summary of Contents for WIRELESS ADAPTER
Page 65: ......