Appendix A: SensorBuilder overview
Wireless Sensors
CARRIER CORPORATION ©2018
Installation Guide
All rights reserved
51
Reusing configurations in SensorBuilder
If you customize the configuration of a
Driver
or a sensor in the
Devices
pane, you can save the configuration so
that you can reuse it later.
1
Select a
Driver
or a
Device
, and make edits in the
Device Configuration
pane.
2
Right-click the item and select
Save configuration
.
3
In the
Sensor description
window, give the configuration an intuitive name in the
Short description
field, and
then click
Save
.
4
Save the file with an intuitive name. The file is saved in
c:\Program Files\SensorBuilder\custom
.
5
To reuse the configuration in the future, right-click the
Driver
or
Devices
pane, select
Load configuration
, and
then select the custom file. You can then copy and paste the driver onto a sensor in the
Devices
pane as
follows:
a)
Right-click the driver, and then select
Copy
.
b)
Right-click a sensor in the
Devices
pane, and then select
Paste
.
c)
Right-click the sensor again, and then select
Send configuration
.
d)
Press the sensor's Learn button.
Reusing lists
If you give custom names to the Wireless Adapter or sensors, the names are stored only on your computer, not in
the devices. If you want to have the names appear on another computer, you can use right-click menu options to
save a list of devices or an individual sensor so that you can copy it to another computer.
For example, if you renamed devices in the
Devices
pane, you might want to have the same names available on
another computer. You can right-click the pane, select
Save device list
, type a file name, and then click
Save
.
Move the file to the other computer. Open SensorBuilder on that computer. Right-click the
Devices
pane, select
Load device list
, and then open the file that you previously saved.
Summary of Contents for WIRELESS ADAPTER
Page 65: ......