Installing the Wireless Adapter and sensors
Wireless Sensors
CARRIER CORPORATION ©2018
Installation Guide
All rights reserved
39
Troubleshooting the wireless sensor installation
•
If the wireless sensors and Wireless Adapter were installed before the space was furnished, use SensorScan
to check the signal between the sensors and Wireless Adapter. Review the
Wireless device placement
guidelines
(page 18) and follow the procedures in
Verify signal strengths
(page 27) to determine if something
is interfering with the signal.
•
If a Pro-F displays
, the sensor is not receiving a response from the Wireless Adapter. If you can find no
reason why the communication has failed, you can press the sensor's Learn button for 4 seconds to reset the
sensor. This is equivalent to restarting a computer. See step 5 in
Pair sensors to the Wireless Adapter
(page
23) for the location of the Learn button.
Summary of Contents for WIRELESS ADAPTER
Page 65: ......