Pairing sensors to the Wireless Adapter using SensorBuilder
Wireless Sensors
CARRIER CORPORATION ©2018
Installation Guide
All rights reserved
24
5
For each sensor that is to be paired with the Wireless Adapter, use one of the following three methods to
have the sensor send a signal to SensorBuilder. The sensor will appear in the
Sensors
pane.
○
Wait for signal
—The sensor will send a signal when the sensor's value changes or when the sensor
sends a heartbeat.
NOTE
You can change the 15-minute heartbeat interval in SensorBuilder. See
To edit a sensor's settings
(page 41).
○
QR scanner
—The sensor does not need to be charged.
a. Connect the scanner to your computer's USB port.
b. Right-click the
Sensors
pane in SensorBuilder, and then select
Scan QR
.
c. Scan the QR label on the back of the sensor.
○
Learn button
—Press the sensor's Learn button (see images below) to send a signal to SensorBuilder.
NOTE
If the Pro-F is turned off (the display is blank), press the Learn button for approximately 5 seconds
to turn it on.
Standard and Plus
Pro-F
Motion/Light
Window/Door
TIP
If SensorBuilder receives signals from other sensors in the vicinity that you do not want to pair with
the Wireless Adapter, double-click each sensor that you do want to pair. Those sensors jump to the top of the
list and are highlighted. Click
below the
Sensors
pane to remove all sensors except the
highlighted ones. Then click
below the
Sensors
pane to stop SensorBuilder from receiving
signals from other sensors.
6
Optional: In the
Sensors
pane, right-click a sensor, and then select
Rename
. In the
Short description
field,
enter an intuitive name that denotes the location or use of the sensor, and then click
Save
. The name is
stored in SensorBuilder for the device ID.
7
In the
Device configuration
pane, select the
Sensors
tab.
8
Drag and drop each item in the
Sensors
pane onto the
Sensors
tab.
TIP
You can use
Shift+click
or
Ctrl+click
to select multiple sensors, and then drag and drop them all at
the same time.
9
In the
Devices
pane, right-click the Wireless Adapter, and then select
Send configuration
to provide the
Wireless Adapter with its pairing configuration.
See
Appendix A: SensorBuilder overview
(page 46) to learn more about SensorBuilder.
Summary of Contents for WIRELESS ADAPTER
Page 65: ......