Installing the Wireless Adapter and sensors
Wireless Sensors
CARRIER CORPORATION ©2018
Installation Guide
All rights reserved
38
b)
Lift the plate from the sensor.
c)
Position the mounting plate on the frame, making sure it is level.
d)
Attach the mounting plate to the frame using the provided mounting screws.
e)
On the mounting plate, insert the CR1216 battery (+ side up) under one contact terminal.
Contact
terminal
Insert
battery
CR
121
6
+
f)
Place the sensor on the mounting plate, aligning the notches on the plate with the offsets on the sensor.
g)
Slide the sensor on the mounting plate until the tab lock clicks.
3
Install the magnet on the interior side of the door or window, aligning the arrows on the sensor and magnet.
a)
Use a screwdriver to push in the tab on the end of the magnet until the front cover pops off.
b)
Position the magnet on the frame, making sure it is level.
c)
Attach the mounting plate to the frame using the provided mounting screws.
d)
Snap the cover onto the magnet.
4
Open and close the contact to test for power. You should hear a faintly audible click and see the LED blink.
To preserve battery life
Maintain at least 700 lux in the space where the sensor is installed.
Summary of Contents for WIRELESS ADAPTER
Page 65: ......