Using SensorScan to determine the best location for devices
Wireless Sensors
CARRIER CORPORATION ©2018
Installation Guide
All rights reserved
27
Step 2: Verify signal strengths
Use one of the following methods to check the signal strength between the proposed Wireless Adapter location
and sensor locations.
Method 1: If the Wireless Adapter is not installed
1
Take your laptop to the proposed location of the Wireless Adapter.
NOTE
If necessary, use a USB extension cable to get the USB Radio as close as possible to the proposed
location. Connecting a USB extension cable will require you to restart SensorScan.
2
Take a wireless sensor to its proposed location.
3
Press the sensor's Learn button to send a signal. See step 5 in
Pairing sensors to the Wireless Adapter
(page
23) for the location of a sensor's Learn button.
4
The USB Radio receives the signal and displays the sensor and the signal strength in SensorScan's right
pane.
A good signal is any number smaller than -85 dB. The smaller the number, the better the signal. For example,
-36 dB is excellent; -85 dB is poor.
NOTE
Click the sensor in the right pane to see more information about it in the left pane.
5
Repeats steps 2–4 for each proposed sensor location.
Summary of Contents for WIRELESS ADAPTER
Page 65: ......