Be sure to read "Precautions" before installation.
How to engage the inner cover
Slide the covers located on the both lateral sides of
the camera and put the inner cover on the camera
until the hooks inside the inner cover are engaged in
the holes of the camera (until a click is heard).
Important:
• Put the inner cover down on the camera until the
outside cover of the camera cannot be seen from
the opening (from which the camera lens is visi-
ble) of the inner cover.If this engagement work is
not successfully performed, the inner cover may
be removed or the hidden part at the top of the
screen may become larger in the wide mode.
• When the camera,
WV
-NS202 or
WV
-NS202A,
with this product and an outdoor dome housing
equipped is mounted, the clearance between this
product and the housing shall be 2 mm or more.
Inner Cover
Instructions
Model No.
WV-Q153
Before attempting to connect or operate this product,
please read these instructions carefully
and save this manual for future use.
Inner cover
+
Put on until a click is
heard
Cover
Hook
This product is an inner cover that is exclusively
designed to be used with the network cameras, WV-
NS202 and WV-NS202A.
Features
•
Refer installation work to the dealer.
Installation work requires skills and experiences.
Failure to observe this may cause fire, electric
shock, injury, or damage to the product. Be sure
to consult the dealer.
•
Be sure to engage the inner cover onto the
camera main body before installation of the
camera main body.
Failure to observe this may cause a drop resulting
in injury or accidents.
Precautions
Installations
Clearance of 2 mm
or more
