Using SensorScan and SensorBuilder to test control program logic
Wireless Sensors
CARRIER CORPORATION ©2018
Installation Guide
All rights reserved
29
You can use SensorScan to simulate a sensor and send values to the i-Vu® application to test control program
logic.
PREREQUISITE
2 USB Radios to run SensorScan and SensorBuilder simultaneously
1
Open SensorScan.
2
Open SensorBuilder, selecting a different USB Radio than the one SensorScan is using.
3
Select the type of sensor you want to simulate in the
Profile
drop-down list.
4
Press
to send a signal to SensorBuilder.
5
In SensorBuilder, pair that simulated sensor to your Wireless Adapter. See
Pairing sensors to the Wireless
Adapter using SensorBuilder
(page 22).
6
In SensorScan, type a value in the green text field, and then click
to send the message to
the Wireless Adapter.
Using SensorScan and SensorBuilder to test control program logic
Summary of Contents for WIRELESS ADAPTER
Page 65: ......