![background image](http://html.mh-extra.com/html/carrier/weatherexpert-48n2/weatherexpert-48n2_controls-start-up-operation-service-and-troubleshooting_2561505259.webp)
CL-3
Start-Up Checklist for 48/50N-Series Packaged Rooftop
(Remove and use for Job File)
I. Project Information
Job Name __________________________________________________________________________________________________
Address ____________________________________________________________________________________________________
City ___________________________________________________________ State ____________________ Zip ______________
Installing Contractor Name ___________________________________________________ Phone ___________________________
Equipment tag / Mark for ______________________________________________________________________________________
Sales Office _________________________________________________________________________________________________
Prestart-up Performed by (Name) _______________________________________________ Phone __________________________
Unit Model (18 Chars) ____________________________________________ Serial (10 Chars) ____________________________
Design Information
II. Start-Up
Electrical
(All readings to be taken at full load
Compressor Motor Current (amps):
Condenser Fan Motor Current (amps):
Supply Airflow
(CFM)
External Static
Pressure (ESP)
Return Air Temperature (RAT)
Supply Air
Temperature
Condenser
Entering Air
Temperature
Dry Bulb (DB)
Wet Bulb (WB)
Supply Voltage
L1-L2 ______________ L2-L3 _______________ L3-L1 ___________
Check Voltage Imbalance
Average Voltage = (L1-L2 + L2-L3 + L3-Ll)/3
Maximum Deviation from Average Voltage = _______________
Voltage Imbalance = _______________% (max. deviation/average voltage) x 100
Voltage imbalance less than 2%.
Yes
No
(Do not start unit if voltage imbalance is greater than 2%.
Contact local utility for assistance.)
Compressor A1
L1___________
L2 ___________
L3 ___________
Compressor A2
L1___________
L2 ___________
L3 ___________
Compressor A3
L1___________
L2 ___________
L3 ___________
Compressor A4
L1___________
L2 ___________
L3 ___________
Compressor B1
L1___________
L2 ___________
L3 ___________
Compressor B2
L1___________
L2 ___________
L3 ___________
Compressor B3
L1___________
L2 ___________
L3 ___________
Compressor B4
L1___________
L2 ___________
L3 ___________
Supply Fan Amps (measured) L1___________
L2 ___________
L3 ___________
ComfortLink ___________
Exhaust Fan Amps
L1___________
L2 ___________
L3 ___________
ComfortLink ___________
Fan amp readings must be taken with a true RMS meter for accuracy
Fan amp reading must be taken with the fan running at 60 Hz.
Outdoor Fan Motor 1
L1___________
L2 ___________
L3 ___________
OFM 2
L1___________
L2 ___________
L3 ___________
OFM 3
L1___________
L2 ___________
L3 ___________
OFM 4
L1___________
L2 ___________
L3 ___________
OFM 5
L1___________
L2 ___________
L3 ___________
OFM 6
L1___________
L2 ___________
L3 ___________
Summary of Contents for WeatherExpert 48N2
