![background image](http://html1.mh-extra.com/html/carrier/telink/telink_overview-and-setup-manual_2563790026.webp)
15
2.
The alert is transmitted to the monitoring center when the
buffer is full. If the buffer is not full, then no transmission
occurs.
When the monitoring site’s TeLINK receives alarm(s)/alert(s) from
a monitored site, it sends a message to the monitored site acknowl-
edging the alarm or alert. It then transmits the alarms/alerts on its
CCN Communication Bus to the ComfortWORKS or Building
Supervisor. Alarms from a monitored site are identified at the
monitoring site’s ComfortWORKS or Building Supervisor by a
Customer Code and Building Number, if applicable.
How the Monitoring Site
Transmits Alarm(s)/
Alert(s) on Its Own
Network
Summary of Contents for TeLINK
