![background image](http://html1.mh-extra.com/html/carrier/telink/telink_overview-and-setup-manual_2563790043.webp)
30
Use this field to initiate the self-health check function. When the
diagnostic check is complete, it is reset to 0.
Allowable Entries
Occupied state: force this value to 1.
Unoccupied state: force this value
to 2.
Default
0
This field displays the current status of TeLINK phone network
processing. One of the following messages will appear in this field:
Message
Current Status of
Phone Network
Idle
No activity.
Calling
Attempting to connect to an enabled
beeper service or a monitoring
center.
Incoming
Received a call and made a connec-
tion to a monitored site.
Outgoing
Connected to a remote network.
Connectd
Connected to a beeper service.
Valid Display
1 to 8 characters (See table above.)
A 16-character field indicating the status of the modem.
Valid Display
1 to 16 characters
A 24-character field displaying the type of installed modem.
Valid Display
1 to 24 characters
Cause Diagnostic Alert
Connection Status
Modem Status
Modem Description
Summary of Contents for TeLINK
