![background image](http://html1.mh-extra.com/html/carrier/telink/telink_overview-and-setup-manual_2563790021.webp)
10
Each TeLINK contains a Controller Identification Table (Ctlr-ID).
This table contains user-configurable product identification informa-
tion that is input when the software is loaded into memory. By
changing the information that appears in this table, you can change
the name, description, and location that appears for the TeLINK in
the ComfortWORKS Controller List, the Building Supervisor’s
Carrier Controls List and in NDS Reports.
The Modem Configuration Table (MODEMCFG) allows custom
modem string data to be entered and downloaded, thus overwriting
the factory and/or default settings.
This table (MONTRDEF) contains decisions related to alarm report-
ing to a monitoring site or beeper service. A TeLINK contains two
types of phone numbers. The Occupied phone numbers are those
that are to be dialed to transmit alarms during occupied periods
(typically during the daytime). The Unoccupied phone numbers are
those that are to be dialed during unoccupied periods (typically
during the nighttime).
Note:
State of occupancy is dictated by the Occupancy Table
(OCCPC01S).
For a monitoring site, you can configure a primary phone number
and a secondary or backup phone number. For a beeper service, you
can configure occupied and unoccupied phone numbers, as well as
message transmission delay time to compensate for variations in
connect times among beeper services.
Each TeLINK contains a Configuration Table (RCSI_CFG). In this
table, you configure the telephone number of the TeLINK's modem,
the password, and whether NDS diagnostics is enabled.
TeLINK contains a standard CCN occupancy table (OCCPC01S) to
provide you with the capability of sending alarms to two different
monitoring sites, depending on the state of occupancy. OCCPC01S
determines the state of occupancy when reporting alarms to a moni-
toring site’s ComfortWORKS or Building Supervisor.
Occupancy Table
TeLINK Configuration
Table
Monitoring Center
Definition Table
Modem Configuration
Table
Controller Identification
Table
Summary of Contents for TeLINK
