![background image](http://html1.mh-extra.com/html/carrier/telink/telink_overview-and-setup-manual_2563790012.webp)
2
The TeLINK control module serves as an interface device between a
Carrier Comfort Network (CCN) and a modem. The module and
modem enable the CCN to communicate over telephone lines with
other similarly equipped CCNs.
In this manual, the terms monitoring site and monitored site are used
to refer to two CCNs linked together as illustrated in Figure 1.
The monitoring site is the CCN that can:
•
receive alarms and alerts from the monitored site.
•
generate ComfortWORKS and Building Supervisor-initiated
calls for the purpose of retrieving data, for example, history and
runtime reports.
•
allow user-initiated calls for the purpose of controlling and/or
monitoring remote system elements.
•
trigger the self-health diagnostic check once a day.
The monitored site is the CCN that can:
•
send alarms and alerts to the monitoring site.
•
dial a numeric-type beeper service in response to alarms.
•
receive ComfortWORKS and Building Supervisor-initiated calls
for the purpose of retrieving data.
•
receive ComfortWORKS and Building Supervisor-initiated calls
for the purpose of controlling and/or monitoring system ele-
ments.
•
provide Network Directory Services (NDS) functions.
TeLINK
Summary of Contents for TeLINK
