![background image](http://html1.mh-extra.com/html/carrier/telink/telink_overview-and-setup-manual_2563790032.webp)
20
In TeLINK there is one Controller Identification Table. It contains
product identification information that is input when the module is
assembled. By changing some of the information that appears in
this table, you can change the name, description, and location that
appears for a TeLINK in the ComfortWORKS Controller List or the
Building Supervisor’s Carrier Controls list, and in NDS Reports.
Figure 5 illustrates a Modem Configuration Table. The table con-
sists of two decisions for configuring modem command strings.
These two strings are used to define the custom configuration of the
modem. For a list of your modem's configuration commands, refer
to the modem user’s guide.
Note:
If you enter command strings in these decisions and
download, the modem will use these new command
strings instead of the default command strings.
Allowable Entries
1-24 characters (per string)
Default Value
blank
Controller
Identification
(Ctlr-ID) Table
Modem
Configuration
(MODEMCFG)
Table
MODEM_CFG
Description
Modem Services
Modem Config String 1
Modem Config String 2
Modem Services
Value
Units
Name
Notes
MDMSTRG1
MDMSTRG2
Figure 5
Modem
Configuration
(MODEMCFG)
Table
Modem Config
String (1-2)
Summary of Contents for TeLINK
