![background image](http://html1.mh-extra.com/html/carrier/telink/telink_overview-and-setup-manual_2563790038.webp)
26
This decision is used to specify the day(s) that the period’s Occu-
pied From and Occupied To values are in effect. From left to right,
the first seven positions of the decision’s data entry field represent
Monday through Sunday. The eighth position represents Holiday.
Each position of the data entry field can be set to 1 or 0. A 1 speci-
fies that the period is in effect on the day that corresponds to that
position; a 0 specifies that it is not in effect on that day. A period
may be specified to be in effect on more than one day-of-week.
The operator can use the keyboard left and right arrow keys to move
among the eight positions of the data entry field. Only the values 1
or 0 should be typed in at each position.
Allowable Entries
0 = period not in effect on
corresponding day
1 = period in effect on
corresponding day
Default Value
1 = for all Period 1,
0 = for other periods
This decision is used to specify the hour and minute, in military
time, that the occupied state begins.
Allowable Entries
00:00 through 24:00
(hour, minute of day)
Default Value
00:00
This decision is used to specify the hour and minute, in military
time, that the occupied state ends.
Allowable Entries
00:00 through 24:00
(hour, minute of day)
Default Value
24:00
Note:
To specify a 24-hour occupied state, enter 00:00 in the
Occupied From decision and 24:00 in the Occupied To
decision. To specify a 24-hour unoccupied state, enter
00:00 in both decisions.
Period 1 - 8 Day Flags
(MTWTFSSH)
Occupied From
Occupied To
Summary of Contents for TeLINK
