![background image](http://html1.mh-extra.com/html/carrier/telink/telink_overview-and-setup-manual_2563790041.webp)
28
Alarm
x
Status
This value displays REPORTED if the alarm was successfully
transmitted through the network, or PENDING if the alarm has yet
to be successfully sent.
Valid Display
REPORTED/PENDING
Figure 10 illustrates the Monitoring Center Maintenance Table.
This table displays the status data for the occupied and unoccupied
centers. The maintenance values displayed in this table are read-
only updated values. An explanation of each value in the table
follows.
This value will indicate whether this monitoring center's primary
phone number is presently enabled for use in data transmission to
and from the monitoring center.
Valid Display
Yes/No
This value will indicate whether this monitoring center's secondary
phone number is presently enabled for use in data transmission to
and from the monitoring center.
Valid Display
Yes/No
Monitoring Center
Maintenance
(MONCTMNT)
Table
Figure 10
Monitoring
Center
Maintenance
(MONCTMNT)
Table
Primary Enabled
Secondary Enabled
MONCTMNT
Description
Primary Enabled
Secondary Enabled
Primary Delay Time
Secondary Delay Time
Pct of Successful Calls
Occ Monitoring Center
Value
Units
Name
Notes
Unocc Monitoring Center
Primary Enabled
Secondary Enabled
Primary Delay Time
Secondary Delay Time
Pct of Successful Calls
SECENAB
PRIMDLAY
SECDLAY
PRIMENAB
SECENAB
SECDLAY
PCT_SUCC
Occ Monitoring Center
No
No
PRIMENAB
PCT_SUCC
PRIMDLAY
No
0
0
0
0
No
0
0
Summary of Contents for TeLINK
