![background image](http://html1.mh-extra.com/html/carrier/telink/telink_overview-and-setup-manual_2563790018.webp)
7
LED functions are described in the table below.
LED
State
Status
Red
blinking
control module
functioning properly
on/off
control module not
functioning properly
Green
off
modem not installed
on
modem installed,
configured, on-hook
blinking
attempting to connect
(on 1 sec., off 1 sec.)
blinking
connected
(on 1 sec., off 3 sec.)
blinking (rapidly)
on whenever
transmitting data
Yellow
off
no activity on CCN
blinking (rapidly)
activity on CCN
The TeLINK module features a Network Service Tool connector on
the front, and CCN bus, power, and modem connectors on the back.
They are described in the table below.
Connector
Type
Service Tool
RJ-11 modular phone jack
Power
0.1 inch (2.5 mm) miniature
power jack
CCN Bus
three pin, screw terminal
Modem
PCMCIA Type II
Connectors
Summary of Contents for TeLINK
