![background image](http://html1.mh-extra.com/html/carrier/telink/telink_overview-and-setup-manual_2563790034.webp)
22
For a listing of the valid characters, refer to your modem user’s
guide.
Allowable Entries
1-24 characters
Default Value
blank
These decisions are used to enter the standard password that will be
used to gain access to the monitoring site during an occupied or
unoccupied state. The passwords entered in these decisions must be
the same as the passwords configured in the monitoring site’s
TeLINK.
Allowable Entries
1-8 alphanumeric characters
Default Value
blank
These decisions are used to specify the telephone numbers that are
dialed when sending alarms to a beeper service during an occupied
or unoccupied state. All digits to be dialed must be specified.
Allowable Entries
1-24 characters
Default Value
blank
These decisions specify the time between establishment of a connec-
tion to the beeper service and transmission of the TeLINK phone
number. This time is initiated after the dial command is issued,
compensating for variations in connect times among beeper ser-
vices.
Allowable Entries
0-60 seconds
Default Value
10 seconds
Occ Monitoring
Center/Unocc
Monitoring Center,
Password
Occ Beeper/Unocc
Beeper Delay Time
Occ Beeper/Unocc
Beeper, Phone Number
Summary of Contents for TeLINK
